| The One Ring http://test.one-ring.co.uk/ |
|
| gluing models http://test.one-ring.co.uk/viewtopic.php?f=46&t=34148 |
Page 1 of 1 |
| Author: | wowcoinja [ Wed Aug 07, 2019 1:52 am ] |
| Post subject: | gluing models |
getting very frustrated. any tips on gluing models together? using gorilla super glue |
|
| Author: | ja33 [ Wed Aug 07, 2019 2:38 am ] |
| Post subject: | Re: gluing models |
hi there - super glue is good for metals and resin. here's some ideas: - makes sure you give all the models a light wash in warm soapy water. This removes the releasing agent used to make the model molds. - allow models to dry thoroughly - do a dry-attach at each join - i.e, line up the arm and the arm socket and get an idea of the fit and angle before gluing - apply small amounts of super glue, and then wait about 30 seconds or so to allow the super glue to activate just a bit - press the two parts together and hold firmly for 60 secs or so - place down carefully, and place at the necessary angle to avoid putting pressure on the newly glued join Hope this helps.... |
|
| Author: | GreatKhanArtist [ Wed Aug 07, 2019 4:16 pm ] |
| Post subject: | Re: gluing models |
Plastic models can be melted together using plastic cement. It's not a glue; it causes a chemical reaction in the plastic that melts it together. This creates an almost indestructible bond. The secret it to use it sparingly. You also won't glue yourself together with it, but it does kind of burn when you get it on skin. |
|
| Author: | wowcoinja [ Wed Aug 07, 2019 8:24 pm ] |
| Post subject: | Re: gluing models |
Thank you both, I will try both ideas! |
|
| Author: | Mr Gimli [ Sat Aug 24, 2019 2:23 pm ] |
| Post subject: | Re: gluing models |
Just a tip on super glue and pva glue (for terrain/basing), you can normally get them for a fraction of the price from discount or buildings trade stores. |
|
| Author: | Gundalad [ Mon Sep 23, 2019 9:57 am ] |
| Post subject: | Re: gluing models |
If it’s a real pain I’ve heard that the army painter activator spray is very good, so once sprayed onto normal glue chemically makes it bond immediately, be careful you have it in the right position ha. |
|
| Author: | stuminiaturerealms [ Mon Nov 18, 2019 9:54 am ] |
| Post subject: | Re: gluing models |
Mitre Bond super glue and activator is very good, and great value compared to Army Painter stuff. For £5 you get 50g of glue and 200ml activator spray. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|