All times are UTC


It is currently Sun Nov 24, 2024 10:51 am



Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Reversible Gaming Board
PostPosted: Thu May 03, 2012 2:36 pm 
Kinsman
Kinsman
Offline

Joined: Wed Oct 26, 2011 11:07 am
Posts: 103
Location: Sydney, Australia
I'm planning on making an 8"x6" modular gaming board out of extruded polystyrene in 2"x2" sections (40mm thick) and I had the idea of making it reversible.

I was thinking about doing a moria/mordor wasteland effect on one side and grassy plains on the other side. Do you guys think that would work? Has anybody done this before?

I intend to use plenty of vanish to seal the flock but am wondering if it will last after quite a bit of usage when underneath.
Top
  Profile  
Reply with quote  
 Post subject: Re: Reversible Gaming Board
PostPosted: Thu May 03, 2012 4:48 pm 
Wayfarer
Wayfarer
Offline

Joined: Tue Apr 24, 2012 10:20 am
Posts: 3
Well I have a similar project going on, however mine is based on a pinboard that someone was going to throw away (so it's rather small for a board, but seeing as this is my first boardbuilding project and it was free, I didn't mind). One side was a bit like wood and the other had a sort of white fur/fabric on it (it's hard to describe). So what I did was paint the fabricside green so it resembled grass. On the other side I used grey and added some sand and some tiles made of a cereal box. That side should become an city environment eventually, some osgiliath-like.

If you think the flock will come off, you might want to use a grassmat on one side (and just glue it on). Or you can make small borders on the side (like my pinboard has) or some kind of small rise in the corners so when its turned over, it rests on these corners rather than on the whole board and the flock. I'm sure someone can come up with an idea to camouflage these rises as a hill or rocks or something. But as I said, I'm new to this :)
Top
  Profile  
Reply with quote  
 Post subject: Re: Reversible Gaming Board
PostPosted: Thu May 03, 2012 9:18 pm 
Elven Elder
Elven Elder
User avatar
Offline

Joined: Thu Apr 01, 2010 11:33 pm
Posts: 3688
Location: Atlanta GA. U.S.A.
Images: 14
Quote:
Do you guys think that would work? Has anybody done this before?

I saw a very nice table at a game shop that was done that way. I was thinking about it my self. I do not have a photo :sad: But I will take one some time this week end and post it! The table was made so that you could switch the surface from top to bottom and over and under so that you could have four tables in one. It also was a passable piece of furniture.

I was mistaken, I do have a photo. It is not detailed for a plain but you can see the different top and bottom boards.
Image
The boards are supported by the edge of the table and can be easily changed or flipped over. You can see the urban board on the bottom. You can see enough of the construction details to have some ideas of how to build your own.

_________________
"the same as a duck you must be made of wood"
Top
  Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 55 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: